Your Subtitle text
"Building on 20 years of EQ design and manufacture, ARX once again redefines the standard for Graphic Equalizers!"
Quality you can feel as well as hear
The steel grey front panel features 30 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader.
As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ130 completely from the signal path.
Accurate Constant Q Circuitry
Internally, the EQ130 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you make to the sound, as compared to traditional EQ designs. In other words, 'what you see is what you get.' Combine this circuitry with the 30 individual filters in the EQ130, and you have an equalizer that is unsurpassed for total accuracy. Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ130's low noise figures.
You'll never compromise on Quality when you choose ARX
Balanced Inputs and Outputs
On the rear panel, the EQ130 has true differential Balanced Inputs and Servo Balanced Outputs on both XLR as well as convenient TRS jack connectors.
There is also an audio ground lift switch to isolate the audio ground from the chassis ground.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
At ARX, we know that there's no shortage of other Equalizers out there! But we believe the ARX EQ130 delivers superlative, uncompromising audio quality that will truly enhance any pro audio application. Its accuracy, compact High Density design, cool good looks, and most of all its superb sound make it the single channel equalizer of choice for demanding engineers around the world.
Quality you can feel as well as hear
Each channel on the silver grey front panel features 30 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader. As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ260 completely from the signal path.
Accurate Constant Q Circuitry
Internally, the EQ260 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you make to the sound, as compared to traditional EQ designs. In other words, 'what you see is what you get.' Combine this circuitry with the 60 individual filters in the EQ260, and you have an equalizer that is unsurpassed for total accuracy. Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ260's low noise figures.
Balanced Inputs and Outputs
On the rear panel, the EQ260 has true differential Balanced Inputs and Servo Balanced Outputs on both XLR as well as convenient TRS jack connectors. There is also an audio ground lift switch to isolate the audio ground from the chassis ground.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
At ARX, we know that there's no shortage of other Equalizers out there! But we believe the ARX EQ260 delivers superlative, uncompromising audio quality that will truly enhance any pro audio application. Its accuracy, compact High Density design, cool good looks, and most of all its superb sound will make it the dual channel graphic equalizer of choice for demanding engineers around the world.
EQ130 Single Channel 'Constant Q' Third Octave Graphic Equalizer
 |
- New XR (Extended Resolution) long-throw faders for maximum control and resolution, with integrated protective dust cover
- New Sweepable High Pass filter 20-200Hz
- Ultra low noise and accurate 'Constant Q' circuitry
- Balanced Inputs and Outputs on XLR and Jack connectors
- Switchable 6dB or 15dB cut and boost
- Audio Ground lift switch on rear
- Intuitive controls
- User friendly layout
- ...and most of all, flawless performance in any audio environment!
Quality you can feel as well as hear
The steel grey front panel features 30 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader.
As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ130 completely from the signal path.
Accurate Constant Q Circuitry
Internally, the EQ130 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you make to the sound, as compared to traditional EQ designs. In other words, 'what you see is what you get.' Combine this circuitry with the 30 individual filters in the EQ130, and you have an equalizer that is unsurpassed for total accuracy. Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ130's low noise figures.
You'll never compromise on Quality when you choose ARX
Balanced Inputs and Outputs
On the rear panel, the EQ130 has true differential Balanced Inputs and Servo Balanced Outputs on both XLR as well as convenient TRS jack connectors.
There is also an audio ground lift switch to isolate the audio ground from the chassis ground.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
At ARX, we know that there's no shortage of other Equalizers out there! But we believe the ARX EQ130 delivers superlative, uncompromising audio quality that will truly enhance any pro audio application. Its accuracy, compact High Density design, cool good looks, and most of all its superb sound make it the single channel equalizer of choice for demanding engineers around the world.
EQ130 TECHNICAL SPECIFICATIONS
- Input Impedance Balanced 20K ohms, Unbalanced 10K ohms
- Input Headroom + 23 dB
- CMRR >55 dB, 20 Hz to 20 KHz
- Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
- Output Level (Max) + 23 dB
- Frequency Response 10Hz to 20KHz ±0.25dB
- Signal to Noise Ratio -93 dB Unweighted, -98 dB 'A' weighted
- Distortion .0035% THD, 0dB, @1KHz
- Dynamic Range 116 dB
- High Pass Filter Sweepable 20-200Hz
- Power Requirements 100/120 V AC, 220/240 V AC, 18VA
- Weight 10lbs/4.5Kg
- Dimensions 19"W x 31/2"H x 8"D, 482 x 89 x 205 mm
- Input Connector Type Balanced XLR
- Output Connector Type Balanced XLR
- 30 x 60mm Extended Resolution long throw, center grounding faders on ISO standard frequencies, 25 Hz to 20 KHz
- Infinity through to +10dB Gain control
- LED clipping indicator
- Sweepable High Pass filter 20-200Hz
- 15 or 6 dB EQ Cut/Boost range switch
- Hardwire bypass EQ IN/OUT switch
- Balanced Inputs and Outputs, on both XLR and TRS jack connectors.
- Audio Ground Lift switch
- AC input connector, with voltage switch and fuse.
EQ260 Dual Channel 'Constant Q' Third Octave Graphic Equalizer
 |
- New XR (Extended Resolution) long-throw faders for maximum control and resolution, with integrated protective dust cover
- New Sweepable High Pass filter 20-200Hz
- Ultra low noise 'Constant Q' circuitry
- Balanced Inputs and Outputs on XLR and Jack connectors
- Switchable 6dB or 15dB cut and boost
- Audio Ground lift switch on rear
- Intuitive controls
- User friendly layout
- ...and most of all, flawless performance in any audio environment!
Quality you can feel as well as hear
Each channel on the silver grey front panel features 30 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader. As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ260 completely from the signal path.
Accurate Constant Q Circuitry
Internally, the EQ260 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you make to the sound, as compared to traditional EQ designs. In other words, 'what you see is what you get.' Combine this circuitry with the 60 individual filters in the EQ260, and you have an equalizer that is unsurpassed for total accuracy. Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ260's low noise figures.
Balanced Inputs and Outputs
On the rear panel, the EQ260 has true differential Balanced Inputs and Servo Balanced Outputs on both XLR as well as convenient TRS jack connectors. There is also an audio ground lift switch to isolate the audio ground from the chassis ground.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
At ARX, we know that there's no shortage of other Equalizers out there! But we believe the ARX EQ260 delivers superlative, uncompromising audio quality that will truly enhance any pro audio application. Its accuracy, compact High Density design, cool good looks, and most of all its superb sound will make it the dual channel graphic equalizer of choice for demanding engineers around the world.
EQ260 TECHNICAL SPECIFICATIONS
- Input Impedance Balanced 20K ohms, Unbalanced 10K ohms
- Input Headroom + 23 dB
- CMRR >55 dB, 20 Hz to 20 KHz
- Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
- Output Level (Max) + 23 dB
- Frequency Response 10Hz to 20KHz ±0.25dB
- Signal to Noise Ratio -93 dB Unweighted, -98 dB 'A' weighted
- Distortion .0035% THD, 0dB, @1KHz
- Dynamic Range 116 dB
- High Pass Filter Sweepable 20-200Hz
- Power Requirements 100/120 V AC, 220/240 V AC, 18VA
- Weight 10lbs/4.5Kg
- Dimensions 19"W x 5 1/4"H x 8"D, 482 x 132 x 205 mm
- Input Connector type Balanced XLR
- Output Connector type Balanced XLR
- 30 x 60mm Extended Resolution long throw, center grounding faders per channel on ISO standard frequencies, 25 Hz to 20 KHz
- Infinity through to +10dB Gain control
- LED clipping indicator
- Sweepable High Pass filter 20-200Hz
- 15 or 6 dB EQ Cut/Boost range switch
- Hardwire bypass EQ IN/OUT switch
- Balanced Inputs and Outputs, on both XLR and TRS jack connectors.
- Audio Ground Lift switch
- AC input connector, with voltage switch and fuse
