Mixer Specifications

Your Subtitle text

UniMIX SPECIFICATIONS

Input Impedance Mic: 4K Ohms Balanced, Line 22K Ohms Unbalanced
Input Gain Microphone: Variable 10 dB to 50 dB with rear trim control, Mic / Line switch -20dB
Output Level ( Max) +21dB
AGC Threshold –50 to –20 dB
AGC Output Gain –20 to +20 dB
Phantom Power: +48VDC switchable on all Microphone Inputs
Output Signal/Noise (@ unity gain) -90dB A weighted, all inputs @ Unity, Master @ Unity
Dynamic Range 115dB
Master Output EQ
Low 100Hz 15dBCut/Boost
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dBCut/Boost
Master Outputs Electronically Balanced XLR 300 ohms Line Level Balanced Output Connectors Male XLR: Pin 1 Ground, Pin 2 +, Pin 3 –
Frequency Response 20Hz-20 KHz ± 1dB
Distortion (@ unity gain Below 0 .0035%, 100 Hz to 10KHz
Input Connector Type Mic/Line Amphenol Female XLR, Hi Z Input - Phono (RCA type)
Output Connector Type Amphenol Male XLR
Recording Output Connector Type TRS Balanced Jacks

Front Panel Controls

Rear Panel

6x Female XLR Balanced Inputs wired Pin 1 Audio Ground, Pin 2 +,
Pin 3 –
RCA type Stereo Line Inputs
Left and Right Transformer isolated TRS Balanced Recording
Output jacks
Left and Right Male XLR Balanced Outputs, wired Pin 1 Audio Ground, Pin 2 +, Pin 3 –
Transformer isolated Auxiliary Master XLR Output
Global Mic input Phantom Power switch
Removable IEC type AC input connector, with inbuilt fuse

UniFace SPECIFICATIONS

Input Impedance 44K Ohms balanced
Output Level (Max) +21dB
AGC Threshold –40 to 0 dB
AGC Output Gain –20 to +20 dB
Output Signal/Noise (@ unity gain) -90dB A weighted, all inputs @ Unity, Master @ Unity
Dynamic Range 115Db
System Master Outputs Electronically Balanced Male XLR 300 ohms:
wired Pin 1 Ground, Pin 2 +, Pin 3 –
Recording Outputs Transformer isolated Balanced Male XLR,
wired Pin 1 N/C, Pin 2 +, Pin 3 –
Frequency Response 20Hz-20 KHz ± 1dB
Distortion (@ unity gain Below 0 .0035%, 100 Hz to 10KHz
Input Connector Type Female XLR

Front Panel Controls

Rear Panel

2 x Female XLR Balanced Inputs wired Pin 1 Audio Ground, Pin 2 +, Pin 3 –
Male XLR Loop Outputs to speaker system amplifiers
Transformer isolated Male XLR Balanced Recording Outputs, wired Pin 1 N/C, Pin 2 +, Pin 3 –
Removable IEC type AC input connector, with inbuilt fuse

MaxiMix SPECIFICATIONS

Front Panel Controls

Rear Panel

MIXX SPECIFICATIONS

Input Gain: Variable 20dB-60dB on each channel by rear panel trim control, plus Mic/Line input switch
Channel Level: Infinity to +6dB Gain
Channel Pan: True L and R constant level Control
Channel EQ:
Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
Frequency Response: 20-20KHz +or- 1dB
Distortion: Below .005% 100Hz to 10KHz
Master Outputs Signal/Noise: -90dB unweighted.
Phantom Power: +48VDC switchable on all Microphone Inputs
Microphone Inputs: Electronically Balanced XLR connector
Channel Outputs: 150 Ohms Line Level jack connector
Master Outputs: Electronically Balanced XLR 300 ohms Line Level
Max Output Level: +20dB
Open Buss Outputs: Virtual Earth Signal Level,
5 pin DIN connector with shielded cable
AC Power Requirements: 100-120/220-240 VAC 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable

MIXXMaster SPECIFICATIONS

Microphone Inputs: Electronically Balanced on XLR Connectors
Stereo Line Inputs: Buffered line level inputs on RCA Connectors
Mic Priority Switchable Channel 1 override; 20dB attenuation
to all other channels
Input Gain: Variable 20dB-60dB on Mic/Line channels by rear panel trim control, plus Mic/Line input switch
Channel Level: Infinity to +6dB Gain
Channel Pan: True L and R constant level Control
Mic and Line Channel EQ:
Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
Frequency Response: 20-20KHz +or- 1dB
Distortion: Below .005% 100Hz to 10KHz
Phantom Power: +48VDC switchable on all Microphone Inputs
Microphone Channel Inputs: Electronically Balanced XLR connector
Master Outputs: Electronically Balanced XLR 300 ohms Line Level
Master Outputs Signal/Noise: -90dB unweighted.
Max Output Level: +20dB
Open Buss Outputs: Virtual Earth Signal Level,
5 pin DIN connector with shielded cable
AC Power Requirements: 100-120/220-240 VAC 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable

BarMix SPECIFICATIONS

Push to Talk Connector TRS jack, wired Tip and Ring shorted to Duck
Hi Z Input Connectors Phono (RCA type)
Balanced Output Connectors Male XLR: Pin 1 Ground, Pin 2 +, Pin 3 –
Frequency Response 20Hz—20KHz ±1dB
Power Requirements 100-120/220-240 V AC,
50/60 Hz 8VA (8 watts) on 3 pin IEC connector
Weight 5 lbs/2.2 Kg
Dimensions 19"W x 13/4"H x 6"D, 482 x 44 x 155mm
BM-1 Remote Level Control DC controlled VCA kit disables front panel Level control. Wall plate connects to BarMIX
via balanced cable with TRS jack connector. Use 1 per Zone.

BarMix SPECIFICATIONS

Input Impedance Microphone 4K Ohms balanced,
Line 100K Ohms unbalanced
Input Gain Microphone Variable 20 dB to 60 dB with rear trim control, Line –10 to +10 dB
Output Level (Max) + 21dB
Signal to Noise Ratio -90 dB ‘A’ weighted, all inputs
@ unity, Master @ unity
Distortion @ Unity Gain Below .005% 100Hz to 10 KHZ
Dynamic Range 115 dB
Mic Channel EQ
Low 100Hz 15dBCut/Boost
High 10KHz 15dBCut/Boost
Zone EQ
Flat or switchable Loudness control:
50Hz and 10KHz 6dBCut/Boost
High 10dBCut/Boost
Level Control Infinity to +6dB Gain (0 to 11)